Watts Shop Performance |
DYNO DAY!!!!! |
Dyno Day of Alex's 383 blown street motor. At only 7 psi on 93 octane pump gas and a small (but streetable) 700cfm Holley carb. The power levels were surprising!!!! |
Setting up the motor on the engine dyno and retorquing the heads after a couple of heat cycles. No dyno pulls till the heads have been retorqed a few times. |
Some adjustments on the carb and timing. With some low RPM pulls, not under full load to check Air/ Fuel ratios and EGTs. |
Some more fine tuning on the carb and timing to dial in the best timing and jet settings. Did some full load pulls. We achived our goal of 12.6 to 12.8 Air/Fuel Ratio and 1270 to 1290 EGTs. Now it's time to add the BOTTLE!!!! |
BOTTLE TIME!!!! |